23 April 2005

Home | Previous | Next

23/4/05
Tacked float switch cutout and static mast with flock. Applied a second layer of Q-cells to manufacturing depression in right h. stab. endcap.
Glassed horizontal stabiliser gusset.
Two machined keepers rivetted to rudder pedals.
Prepared vertical stabiliser and fuse for bonding. Grommet formed at rudder cable exit hole in inner fuse skin using Dow Corning sealant.
Manufactured bus bar board from perspex & mounted bus bars & master switch relay.

Time: 10 hours
Total Time: 184 hours

Home | Previous | Next